Installation Guide

Home / Wheels & Tires / Wheel Accessories / Wheel Spacers for Sprinter 2500 (Set of 4) by Agile Offroad Installation Guide

Wheel Spacers for Sprinter 2500 (Set of 4) by Agile Offroad

SKU: AOR00002, AOR00003, AOR00004, AOR00006, AOR00007

Installation Manual PDF Download Video Additional Information

Installation Manual

Package Includes:

  • (4) AO wheel spacers
  • (24) Wheel studs
  • (24) Lug nuts
  • (1) Loc-tite packet
  • (1) Lug nut key (aftermarket alloy wheels only)

Installation Steps

1

Lift your vehicle, support it with jack stands, and remove the wheels. Clean rotor flange & hub threads of rust and debris.

2

Apply red thread-locker and thread the new wheel studs into the hub. Note, the end with the shorter threads goes into the hub.

3

Use a 5/32” Allen key to tighten all of the wheel studs. Tighten studs until fully seated then torque to 25 ft-lbs.

4

Apply a small amount of anti-seize to where the wheel spacer sits on the rotor flange. Install the Agile Wheel Spacer.

5

Apply a small amount of anti-seize to exposed wheel stud threads.

6

Re-install wheels using the appropriate lug nuts for the wheel. Lower vehicle on the ground. Torque the lug nuts to 125 ft-Lbs.

Note: Minimum thread engagement is 7 full turns.

Installers note:

  • Use Ball seat lug nuts for factory steel/alloy wheels
  • Use Acorn seat lug nuts for aftermarket alloy wheels